Adding Further Items (Tare Function); Switching The Scales Off; Cleaning And Care - Silvercrest SKWS 5 A2 Bedienungsanleitung

Adding further items (tare function)

You can set the scale back to "0" to weigh additional quantities.
■ Press the on/off button
grams and also the
■ Place the additional partial load on the scale. The display
weight of the items you have added and the
You can repeat this procedure several times. However, never place a load of
more than 5,000 grams on the scales.
■ To end the tare function, remove the items from the scale. Then press the On/Off
button
longer the
NOTE
► Never place a load of more than 5,000 grams on the scales. If the maximum
weight capacity is exceeded, the scales will show "Err" on the display
Switching the scales off
■ Press and hold the on/off button
■ The scales switches off automatically after around 2 minutes if...
–
you do not press any buttons,
–
you do not place any items on the scales,
–
you do not remove any items from the scales.

Cleaning and care

CAUTION – PROPERTY DAMAGE
Damage to the appliance!
► To avoid irreparable damage to the appliance, ensure that no moisture can
get into the appliance during cleaning.
► Do not use abrasive or chemical cleaners, nor pointed or scratchy objects
to clean the appliance's surfaces.
■ Wipe the scales with a damp cloth. For stubborn soiling, add a little mild
detergent to the cloth.
GB │ MT
│
■ 44
/zero button
symbol.
/zero button . The scales now indicate a weight of "0" and no
symbol.
. The scales will again show "0"
symbol.
/ zero button to switch the scales off.
will show the
.
SKWS 5 A2