Cleaning Mode; Auto Mode - Silvercrest SSRA1 Bedienungs- Und Sicherheitshinweise

Note: If pause more than 10 minutes the robot
vacuum cleaner will enter Sleep mode and the
"Start / Pause" button
Press the "Start / Pause" button on the robot
vacuum cleaner
13
again to exit Sleep mode. Then press any button
to resume cleaning.
Note: When the product resumes after being paused,
it may recalculate the area and may clean areas it
has already cleaned.

Cleaning mode

The product features different cleaning modes for
better results. You can select the modes by pressing
the key in the control panel, the remote control or
in the app.
To switch the next mode, ensure the product is
"Awake". If it is asleep, press the "Start / Pause"
button on the robot vacuum cleaner
remote control to exit sleep mode.
30
Classic mode
In this mode the product moves in all directions.
This mode is recommended for cleaning carpets.
Press the "Start / Pause" button on the robot
vacuum cleaner
13
to start "Classic mode".
will go off.
13
or the remote control
30
or the
13
or the remote control
30

Auto mode

In this mode the product uses parallel, overlapping
lanes. It will first vacuum along the edges of the room
for guidance and to measure the room.
Press the "Auto mode" button on the robot
vacuum cleaner
14
to start this mode.
Spot mode
This mode is suitable for very dirty or very dusty
areas. In Spot cleaning mode the product will focus
on one area to clean.
Press the "Spot mode" button on the robot vac-
uum cleaner or the remote control
16
this mode.
Operation
or the remote control
34
to start
33
GB/MT 97