Technical Data; Safety Information; Symbols Used In The Instructions; General Notes On Safety - Parkside PNTS 1400 E2 Originalbetriebsanleitung

Technical data

Rated voltage ......220-240 V~, 50/60 Hz
Rated power input
(Power consumption) ...................1400 W
Cable length.....................................4 m
Safety class ......................................
Protection category........................... IPX4
Suction force .............17 kPA, (170 mbar)
Stainless steel container capacity
gross .................................. approx. 23 l
useful volume ....................... approx. 15 l
Weight (incl. all accessories) ..approx. 6.3 kg
Technical and visual modifications may
be carried out due to further development
without prior notice. All dimensions, infor-
mation and statements provided in these
Operating Instructions are therefore subject
to amendment. Legal claims which are
based on the Operating Instructions can
therefore not be recognised.

Safety information

Symbols used in the
instructions
Hazard symbols with in-
formation on prevention of
personal injury and property
damage.
Precaution symbol with information
on prevention of harm / damage.
Notice symbol with information on
how to handle the device properly.

General notes on safety

Caution! When using electrical ma-
chines, observe the following basic
safety measures for the prevention
of electric shocks and the risk of
II injury and fire:
To avoid accidents and injuries:
• Never leave a machine which is ready
for operation unattended at the work-
place.
• People and animals must not be vacu-
umed with the machine.
• Do not aim the suction hose and noz-
zle at yourself or others during use,
particularly not at the eyes and ears;
there is a risk of injury.
• Do not vacuum any hot, incandescent,
flammable, explosive materials, or
those which endanger health. This in-
cludes hot ashes, petrol, solvents, acids
or caustic solutions. Personal injury
could occur.
• Nozzles and suction tubes must not
reach head level whilst in use. Personal
injury could occur.
To avoid accidents and injuries
from electric shocks:
• Ensure that the mains cable is not
damaged by being pulled over sharp
edges, by jamming, or by pulling on
the cable.
• Before each use, check the power sup-
ply lead and the extension cable for
damage and ageing. Do not use the
equipment if the cable is damaged or
worn. Danger of electric shock hazard.
• If the power cable for this equipment is
damaged, it must be replaced by the
manufacturer, a customer service agent
of the same or a similarly qualified per-
son in order to prevent hazards.
GB
7