Description Of Operation; Technical Data; Symbols And Icons; Symbols Used In The Instructions - Parkside PWD 30 A1 Originalbetriebsanleitung

Description of operation

The wet and dry vacuum cleaner is
equipped with a robust stainless steel
container for waste collection. The castors
provide good manoeuvrability of the appli-
ance. The suction flow is switched off by a
float during wet vacuuming once the waste
tank is full. In addition, the machine has a
blower function and a socket for the con-
nection of a further electrical appliance-
with maximum power rating of 1400 W.
The following describes the function of the
operating parts.

Technical data

Wet and dry
vacuum cleaner ...................... PWD 30 A1
Mains voltage (U) .........220-240 V~, 50 Hz
Power consumption of motor (P) ...1500 W
Max. load on appliance socket
(Pmax.) ..................................1400 W
Power consumption of motor
+ max. load on appliance socket
(Psum.) ..................................... 2900 W
Safety class .......................................... I
Protection category.................... IPX4
Cable length.....................................6 m
Waste tank capacity (gross)............... 30 l
Weight (incl. all accessories) .. approx. 8.8 kg
Sound pressure level
(L ) ..................72/73 dB(A); K
pA
* The plug is suitable for indoor use only.

Symbols and icons

Symbols used in the
instructions
Read the operating instruc-
tions carefully.

Symbols on the appliance

*
= 3 dB
pA
C
GB IE
Hazard symbols with
information on preven-
tion of personal injury
and property damage.
Precaution symbol with infor-
mation on prevention of harm
/ damage.
Pull out the mains plug.
Connect the machine
to the power supply.
Notice symbol with informa-
tion on how to handle the
device properly.
Electrical machines must not
be disposed of with house-
hold refuse.
The plug is suitable for indoor
use only.
Switching between addi-
tional appliance + vacuum
cleaner
Max. load on appliance
socket
There is a risk of fire if the
suction material exceeds
a temperature of 40 °C
(104 °F)!
Device socket for power tools
Reference to the filter
cleaning system
NI CY
7