Nozzles
24 Floor nozzle for dry suction
25 Floor nozzle for wet suction
26 Crevice nozzle
27 Cushion nozzle
28 Car nozzle
29 2 retaining brackets
8b 5 cross recessed screws
3b Filter basket
30a Top cable holder
30b Bottom cable holder
Description of operation
The wet and dry vacuum cleaner is
equipped with a robust stainless steel
container for waste collection. The castors
provide good manoeuvrability of the appli-
ance. The suction flow is switched off by a
float during wet vacuuming once the waste
tank is full. In addition, the machine has a
blower function and a socket for the con-
nection of a further electrical appliance.
The following describes the function of the
operating parts.
Technical data
Wet and dry
vacuum cleaner .................. PNTS 1500 C4
Mains voltage (U) .........220-240 V~, 50 Hz
Power consumption of motor (P) ...1500 W
Max. load on appliance socket
(Pmax.) ..................................2200 W
Power consumption of motor
+ max. load on appliance socket
(Psum.) ..................................... 3700 W
Safety class .......................................... I
Protection category........................... IPX4
Cable length.....................................6 m
Waste tank capacity (gross)............... 30 l
Weight (incl. all accessories) .. approx. 8.8 kg
Sound pressure level
(L
) ........................77 dB(A); K
pA
Symbols and icons
Symbols used in the
instructions
Hazard symbols with in-
formation on prevention of
personal injury and property
damage.
Precaution symbol with information
on prevention of harm / damage.
Pull out the mains plug.
Connect the machine
to the power supply.
Notice symbol with information on
how to handle the device properly.
Symbols on the appliance
Electrical machines must not be dis-
posed of with household refuse.
Switching between additional ap-
pliance + vacuum cleaner
Max. load on appliance socket
Device socket for power tools
Reference to the filter cleaning
system
GB
MT
= 3 dB
pA
35