Functional Description; Pictograms Regarding The Use Of Nozzles And Filters; Technical Data - Parkside PWD 12 A1 Originalbetriebsanleitung

NI
GB IE

Functional description

The wet and dry vacuum cleaner is
equipped with a robust plastic container
for waste collection. The castors make the
appliance very easy to manoeuvre. The
suction flow is switched off by a float dur-
ing wet vacuuming once the waste tank is
full. The appliance is also equipped with a
blower function.
The following describes the function of the
operating parts.
Pictograms regarding the
use of nozzles and filters
Nozzle to vacuum carpets.
Nozzle to vacuum smooth surfaces
and hard floor surfaces.
Nozzle to vacuum dust and dirt
from joints and cracks.
Specific nozzle to vacuum cushions
and mattresses.
Specific nozzle to clean the car.
Filter to absorb liquids.
Filter not suitable to absorb liquids.
Filter to absorb dry dirt from the
house, garage and workshop.
Filter to absorb fine dust e.g. stone
dust or wood dust.
6
CY

Technical data

Wet & dry
vacuum cleaner............ PWD 12 A1
Rated voltage U ...220-240 V~, 50/60 Hz
Rated power input
(Power consumption) P ............... 1200 W
Safety class ......................................
Protection category................... IPX4
Suction force ............................ 180 AW
Mains cable length ........................... 4 m
Waste tank capacity (gross)............... 12 l
Usable container volume (water) ........ 12 l
Weight (incl. all
accessories) ........................ approx. 4 kg
* Plug for indoor use only.
Technical and visual modifications may
be carried out due to further development
without prior notice. All dimensions, infor-
mation and statements provided in these
Operating Instructions are therefore subject
to amendment. Legal claims which are
based on the Operating Instructions can
therefore not be recognised.
II
*