Stryker SDC Ultra Bedienungsanleitung Seite 37

Editing Channel 2 Video Settings
To edit channel 2 video settings, press the Video Settings button on the Capture
screen and then press the Channel 2 Video Settings button.
2
1. Select the Record Format from the drop-down menu. This will be
enabled only if the DVD write format is DVD Data and channel 1
recording format is MPEG 2 HD.
2. Select the Signal from the drop-down menu.
Editing PIP Settings
To edit PIP settings, press the Video Settings button on the Capture screen and
then press the PIP settings button.
1
2
1. Press the corresponding quadrant to display the location of the picture
in picture.
Press the PIP Size button to set the size of PIP to small or regular.
2.
1
31