Stryker SDC Ultra Bedienungsanleitung Seite 15

Warning The printer must be properly connected to the isolation
transformer prior to use. Failure to do so may result in a higher
leakage current for the printer.
Note See the "Technical Specifications" for approved printers and
transformers.
3. Connect the AC power.
Warning Do not use extension cords or three-prong to two-prong
adapters when connecting the AC power.
Warning Check the power cord assembly periodically for damaged
insulation or connectors.
• Connect the provided power cord to the AC inlet on the rear
console panel.
• Connect the other end to a hospital-grade power outlet.
9