Use & Maintenance; Electronic Functions; Use Of Manual Functions - Jacuzzi mynima 80 SPHERE Bedienung-Wartung

USE & MAINTENANCE
Functions
MANUAL FUNCTIONS
these functions are available for all models.
Showerhead (pos. E, see "Use of manual functions")
Showerhead, providing different water jet forms and flow; to se-
lect these turn the dial to the corresponding symbol.
Vertical hydromassage (pos. C and D)
equipped with simultaneous water jets (4 at the top and 4 at the
bottom), which are emitted from the nozzles on the wall panel.
Jets can be tilted in four directions, by pressing the nozzle and
moving it to the required position.
"Aqua Feeling" showerhead (pos. A)
positioned at the centre of the crossbar to create a wide rain-effect jet.
"Enerjet" showerhead (pos. B)
positioned at the two ends of the crossbar with an adjustable
jet, for direction and shape.

ELECTRONIC FUNCTIONS

these functions are only available for TT models.
Steam bath
Scale removal cycle
Alarm
See chapter "Use of electronic functions".

Use of manual functions

Before using any function, it is advisable to adjust the water
temperature to the required value, in this way:
I Turn the dial (M) so that the notch matches up with the cho-
sen value. The knob is provided with a safety lock that fixes the
temperature at 38°C; to select higher temperatures, push the but-
ton (P).
The maximum temperature of the mixed water must not
exceed 60 °C.
I If you wish to try the water temperature, turn the diverter dial
(G) to the "showerhead" position and turn the stop tap (R) to let
water come out.
I Once the required water temperature has been reached, turn
the dial (G) to the position that indicates the chosen function.
N.B. it is also possible to use two functions at the same time: just
position the diverter dial half way between the two functions (you
will hear a "click"). If, for example, you wish to use all the jets at
the same time, you must turn the dial to the position between the
symbols (C) and (D); naturally, there will be a drop in water pres-
sure and a decrease in the power of individual jets.
Remember to turn off the stop tap every time after use (R).
If temperatures above 38 °C have been selected, it is ad-
visable to turn back the thermostatic mixer dial to the po-
sition before the safety lock.
9