Maintenance And Cleaning; Disposal - Parkside IAN 311369_1904 Originalbetriebsanleitung

Maintenance and cleaning

WARNING! RISK OF INJURY!
Disconnect the appliance from the
compressed air supply.
CAUTION!
► The dust and vapours produced by using the
appliance can be hazardous to health
(e .g . cause cancer, birth defects, asthma and/
or dermatitis); it is essential to carry out a risk
assessment in respect of these risks and to
implement corresponding regulatory mecha-
nisms .
NOTE
► The following points must be observed to
ensure that the compressed air tool functions
correctly and has a long service life:
■ Use only the genuine replacement parts recom-
mended by the manufacturer, otherwise you
could put users at risk . In doubt, contact the
Service Centre .
■ Use only accessories and supplies of the sizes
and types recommended by the manufacturer
of the rivet gun .
■ Only clean the appliance with a soft, dry cloth
or with compressed air .
■ Never use sharp or scratchy cleaning agents
under any circumstances .

Disposal

The packaging consists of environmen-
tally friendly material . It can be
disposed of in local recycling
containers .
Do not dispose of the appliance in the normal
domestic waste!
Your local community or municipal authorities can
provide information on how to dispose of the
worn-out appliance .
Dispose of the packaging in an
environmentally friendly manner .
Note the labelling on the packaging
and separate the packaging material
components for disposal if necessary .
The packaging material is labelled with
abbreviations (a) and numbers (b) with
the following meanings:
1–7: plastics,
20–22: paper and cardboard,
80–98: composites .
Your local community or municipal
authorities can provide information on
how to dispose of the worn-out product .
The product is recyclable, subject to
extended producer responsibility and
is collected separately .
Dispose of lubricants and cleaning agents in an
environmentally friendly manner . Observe the legal
regulations .
■ Dispose of lubricant residues at a disposal
point . Do not allow lubricants to enter drains or
watercourses . Do not allow them to get into the
subsoil/soil . Make sure you use a suitable mat/
surface . Dispose of lubricants in accordance
with official regulations .
Dispose of contaminated maintenance material
and consumables at a collection point provided for
this purpose .
GB │ IE │ 13 ■