Herunterladen Inhalt Inhalt Diese Seite drucken

Operation; Switching On; Switching Off; Setting The Rotational Speed - Parkside PWBS 180 B2 Originalbetriebsanleitung

Wand- und boden-bearbeitungssystem
Vorschau ausblenden Andere Handbücher für PWBS 180 B2:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Operation

Tool direction of rotation!

Switching on

To switch on the appliance, slide the On/Off
switch
forwards.
To lock the On/Off switch
switch
down at the front until it clicks
into place.
Switching off
To switch off the power tool, let go of the On/
Off switch
. If it is locked, press the rear end
of the On/Off switch

Setting the rotational speed

Before starting work, set the speed to suit the appli-
cation. Use a low speed for coarse sanding;
increase the speed for fine sanding.
Adjust the speed by pressing the buttons
Press the + button
Press the – button
NOTE
The accessory tool rotates after switching off.
Wait until the accessory tool has come to a
standstill before putting down the appliance.
GB │ MT
44 
, press the On/Off
and then release it.
.
to increase the speed.
to decrease the speed.

Maintenance and cleaning

WARNING! RISK OF INJURY!
Switch the appliance off and remove
the power plug before starting any
work on the appliance.
The appliance is maintenance-free.
Do not use any sharp objects for cleaning
the appliance. Do not allow any liquids to get
into the appliance. The appliance could be
damaged.
Clean the appliance regularly, preferably imme-
diately after completion of the work.
Clean the housing with a dry cloth – do not use
petrol, solvents or cleaners that can attack the
plastic.
Never obstruct the ventilation openings.
Remove any adhering swarf with a brush.
NOTE
Unlisted replacement parts (such as carbon
brushes, switch) can be ordered via our
service hotline.

Emptying the dust bag

To ensure optimum dust extraction, empty the dust
bag
regularly.
Open the zip on the dust bag
Shake out the dust bag
waste container.
Storage and handling of the
recommended accessory tools
Sanding tools are to be treated with care and
transported carefully.
Sanding tools should be stored in such a way
that they are not exposed to mechanical
damage or environmental influences (e.g.
damp).
.
over a suitable
PWBS 180 B2

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis