Installing The Pme Setup Assistant - HBM MP85A FASTpress Kurzanleitung

MP85A(DP) FASTpress, MP85A(DP)−S EASYswitch
3

Installing the PME Setup Assistant

• Insert the CD into the drive
Installation starts automatically or can be called up from the "Setup.exe" file.
Alternatively, the current Assistant can be downloaded from the HBM website
http://www.hbm.de
After installation, an icon is generated in the Windows
Start menu, with which the Assistant can be launched.
The Assistant initially displays the Setup window where the MP85A process
controller connection settings must be specified.
Interface
type
Opens the
Setup window
IMPORTANT
The network segment of the MP85A process controller (factory settings:
192.169.169.10) must also be set in the network settings of the PC (no auto-
matic address assignment via DHCP). The PC address may only differ in the
last group from the address of the MP85A process controller:
IP address example:
Subnet mask example
Further information and tips can be called up by clicking on the Help button.
A2073-5.0 en/de/fr
> Support > Download > Software.
192.168.169.11
255.255.255.0
192 168 169 10
9
Factory settings
for the interface
Scanning the bus
for connected PME
modules