Inhaltsverzeichnis
Werbung
2
Safety Notes
General Power Tool Safety Warnings
WARNING
Read all safety warnings and all instructions.
Save all warnings and instructions for future
reference.
2.1
Workplace safety
a) Keep work area clean and well lit.
b) Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gases or dust.
c) Keep children and bystanders away while
operating a power tool.
2.2
Electrical safety
a) Power tool plugs must match the outlet.
Never modify the plug in any way. Do not use
any adapter plugs with earthed (grounded)
power tools.
b) Avoid body contact with earthed or
grounded surfaces, such as pipes, radiators,
ranges and refrigerators.
c) Do not expose power tools to rain or wet
conditions.
d) Do not abuse the cord. Never use the cord
for carrying, pulling or unplugging the
power tool. Keep cord away from heat, oil,
sharp edges and moving parts.
e) When operating a power tool outdoors, use
an extension cord suitable for outdoor use.
f) If operating a power tool in a damp location
is unavoidable, use a residual current device
(RCD) protected supply.
2.3
Personal safety
a) Stay alert, watch what you are doing and use
common sense when operating a power tool.
Do not use a power tool while you are tired
or under the influence of drugs, alcohol or
medication.
b) Use personal protective equipment. Always
wear eye protection.
c) Prevent unintentional starting. Ensure
the switch is in the off-position before
connecting to power source and/or battery
pack, picking up or carrying the tool.
d) Remove any adjusting key or wrench before
turning the power tool on.
e) Do not overreach. Keep proper footing and
balance at all times.
f) Dress properly. Do not wear loose clothing
or jewellery. Keep your hair, clothing and
gloves away from moving parts.
g) If devices are provided for the connection
of dust extraction and collection facilities,
ensure these are connected and properly
used.
Werbung
Kapitel
Inhaltsverzeichnis
