Initial Start-Up; Inserting/Removing The Rechargeable Battery; Attaching The Nozzles; Wet Nozzle - Parkside PHSSA 20-Li A1 Originalbetriebsanleitung

• Only have repairs performed by
customer service centres authori-
zed by us.
• Comply with the device's cleaning
and maintenance instructions.
• Store the device in a dry place
and out of reach of children.
Observe the safety informa-
tion and notes on charging
and proper use as shown in
the instruction manual for
your battery and charger
from the Parkside X 20 V
Team series. A detailed de-
scription of the charging pro-
cess and further information
can be found in the separate
instruction manual.

Initial start-up

Before each use, ensure the filter (3) and
filter holder (2) are sitting correctly in the
collection container (1).
Also inspect the device visually for damage.
Do not operate the device if da-
maged or incorrectly assembled!
Replace damaged parts and dirty
filters. See "Spare parts/accesso-
ries".
Ensure that the battery is not inser-
ted! (See section "Inserting/remo-
ving the rechargeable battery")
1. Remove the collection container (1) by
pressing the release button (4) and de-
taching the collection container (1).
2. Check that the filter holder (2) is sitting
securely against the mechanical stop
in the collection container (1) by lightly
pressing the filter holder (2). Due to its
shape, the filter holder (2) can only be
inserted into the collection container (1)
in one position.
3. Check whether the filter (3) is sitting
securely in the filter holder (2). Lightly
press the filter into the filter holder (2).
4. Re-attach the collection container (1)
onto the device. Place it on the under-
side of the device and allow it to latch
into the interlock release on the top side
of the device.
Inserting/removing the
rechargeable battery
Ensure that the cordless hand-held
vacuum cleaner is switched off.
1. To insert the battery into the device,
push the battery along the guide rail
(10) into the device. You will hear it
click into place.
2. To remove the battery from the device,
press the release button on the battery
and pull the battery out.

Attaching the nozzles

Insert the desired nozzle into the front
opening of the collection container (1).
Remove the nozzle by pulling it forward
out of the collection container (1).

Wet nozzle

The wet nozzle (9) is suitable for vacuu-
ming liquids.
When transporting the cordless
hand-held vacuum cleaner after
vacuuming liquids, always hold the
device vertically with the wet nozzle
(9) pointing downwards otherwise
liquid will leak out!
IE NI CY
7