Charging The Battery; Initial Start-Up - Parkside PMSSA 8 A1 Originalbetriebsanleitung

GB IE
from an electric
shock.
• The device may only be
powered with SELV (Safety
Extra Low Voltage) as indi-
cated by the label on the
appliance.
• Charge the battery before
using it for the first time.
• To charge the Li-ion battery
integrated in the appliance,
use only the XZ0900-
2400ENCG charger
supplied.
• Always comply with the
latest safety instructions,
as well as the regulations
and information relating to
environmental protection.
• Defects resulting from im-
proper handling are not
covered by the warranty.
Charging the
battery
1. Connect the charging
cable connector (9) to the
charging socket (7) on the
device.
2. Plug the charger (
into a socket.
30
3. The battery indicator (6)
lights up:
Flashing red - battery
Flashing orange (red illu-
Flashing green (red/oran-
Red/orange/green illuminated
4. Once charging is complete,
disconnect the charger
(
ply.

Initial start-up

Before each use, ensure the
filter (12) and filter holder (11)
are sitting correctly in the col-
lection container (1).
Also inspect the device visually
for damage.
8)
almost empty,
charging
minated) - battery
2/3 empty, char-
ging
ge illuminated)
- battery 1/3
empty, charging
- battery is fully
charged
8) from the mains sup-
Do not operate the
device if damaged or
incorrectly assembled!
Replace damaged parts