Additional Safety Instructions; Residual Risk; Initial Start-Up - Parkside PLBA 20-Li A1 Originalbetriebsanleitung

Additional safety instructions:

• Do not use any accessories
that are not recommended by
PARKSIDE. This can result in
electric shock or fire.
Observe the safety in-
formation and notes on
charging and proper
use as shown in the
instruction manual for
your battery and charg-
er from the Parkside
X 20 V Team series. A
detailed description of
the charging process
and further information
can be found in the sep-
arate operating instruc-
tions.
Recommendation:
• Avoid operating the machine in
poor weather conditions, espe-
cially when there is a lightning
hazard.

ReSIdual RISk

Even if properly operating and han-
dling this electric tool, some residual
risks will remain. Due to its construc-
tion and build, this electric tool may
present the following hazards:
a) Ear damage if working without
ear protection.
b) Damage to your health caused
by swinging your hands and
arms when operating the appli-
ance for longer periods of time
or if the unit is not held or main-
tained properly.
c) Lung damage, if suitable respira-
tory protection is not worn.
d) Eye injuries if no suitable eye
protection is worn.
Warning! During operation,
this electric tool generates an
electromagnetic field which,
under certain circumstances,
may impair the functionality
of active or passive medical
implants. In order to reduce
the danger of serious or fatal
injuries, users who wear medi-
cal implants must consult their
doctor and the manufacturer
of the implant before operat-
ing the machine.

Initial start-up

Before operating the device, you must
- insert the battery,
- mount the blower pipe.
Caution! Risk of injury!
During assembly or disas-
sembly of the blower pipe,
the device must be turned
off and all moving parts
must have come to a stand-
still. Remove the battery
from the device before car-
rying out any work!
GB CY
11