Technical Data; Before Putting The Machine Into Operation - EINHELL RT-TS 2031 U Originalbetriebsanleitung

Anleitung_RT_TS_2031_U_SPK1__ 07.08.14 13:51 Seite 17
also imperative to observe the accident prevention
regulations in force in your area. The same applies
for the general rules of health and safety at work.
The manufacturer shall not be liable for any changes
made to the machine nor for any damage resulting
from such changes.
Even when the machine is used as prescribed it is
still impossible to eliminate certain residual risk
factors. The following hazards may arise in
connection with the machineʼs construction and
design:
Contact with the saw blade in the uncovered
n
saw zone.
Reaching into the running saw blade (cut
n
injuries).
Kick-back of workpieces and parts of work-
n
pieces.
Saw blade fracturing.
n
Catapulting of faulty carbide tips from the saw
n
blade.
Damage to hearing if ear-muffs are not used as
n
necessary.
Harmful emissions of wood dust when used in
n
closed rooms.
Please note that our equipment has not been
designed for use in commercial, trade or industrial
applications. Our warranty will be voided if the
machine is used in commercial, trade or industrial
businesses or for equivalent purposes.

5. Technical data

AC motor
Power P
Idle speed n
0
Carbide saw blade
Number of teeth
Bench size
Cutting height max.
Height adjustment
Tilting saw blade
Extractor socket
Weight
230 V 50Hz
S1 1200 W S6 20% 2000 W
2800 min
Ø 315 x Ø 30 x 3.6 mm
24
800 x 550 mm
83 mm/0°
60 mm / 45°
infinite 0 -83 mm
infinite 0° - 45°
Ø 100 mm
52 kg
Sound and vibration
Sound and vibration values were measured in
accordance with EN 61029.
L sound pressure level
pA
K uncertainty
pA
L sound power level
WA
K uncertainty
WA
Wear ear-muffs.
The impact of noise can cause damage to hearing.
„Keep the noise emissions and vibrations to a
minimum.
Only use appliances which are in perfect working
n
order.
Service and clean the appliance regularly.
n
Adapt your working style to suit the appliance.
n
Do not overload the appliance.
n
Have the appliance serviced whenever
n
necessary.
Switch the appliance off when it is not in use.
n
6. Before putting the machine into
operation
Unpack the bench-type circular saw and check it
n
for damage which may have occurred in transit.
The machine has to be set up where it can stand
n
firmly, e.g. on a work bench, or it must be bolted
to a strong base.
All covers and safety devices have to be
n
properly fitted before the machine is switched
-1 on.
It must be possible for the saw blade to run
n
freely.
When working with wood that has been
n
processed before, watch out for foreign bodies
such as nails or screws etc.
Before you actuate the On/Off switch, make sure
n
that the saw blade is correctly fitted and that the
machineʼs moving parts run smoothly.
Before you connect the machine to the power
n
supply, make sure the data on the rating plate is
the same as that for your mains.
GB
Idling
103,5 dB(A)
3 dB
92,9 dB(A)
3 dB
17