Grass Catcher Cleaning And Replacement; Maintenance Schedule - Honda HRG416XB Bedienungsanleitung

GRASS CATCHER CLEANING AND
REPLACEMENT
GRASS CATCHER FABRIC CLEANING
CAUTION:
• Washing with a high pressure washer or
steam jet will damage the grass catcher
fabric.
• Blocked mesh will prevent the grass from
entering the grass catcher fabric.
• To clean the grass catcher fabric, we
recommend washing it using a water jet
directed from the outside to the inside of the
grass catcher fabric. The grass catcher
fabric must be completely dry before being
used again. If the grass catcher fabric is
damp, it will become clogged very quickly.
Objects struck by the cutting-means may be thrown through a
torn or damaged grass catcher.
Objects thrown out by the cutting-means can cause serious
injuries. Always replace a torn or damaged grass catcher.
GRASS CATCHER FABRIC REPLACEMENT
The grass catcher fabric tends to wear even in normal conditions of
use. Regularly check that it is not frayed or torn. Replace a
damaged grass catcher fabric with Honda Genuine parts.
1. Detach the plastic edges [1] of the worn grass catcher fabric [3]
and remove the grass catcher's frame [2].
2. Insert the frame into the new grass catcher fabric and fit the
plastic edges [1] to the frame.
[1]
[2]
CLEANING
Before transport or storage ensure machine is clean and free from
debris, if necessary clean with a soft, dry brush or a rag.
To clean the grass catcher, use water from a hose. Do not use high
pressure washer. Do not use detergent for cleaning the machine.
Keeping the underside of the machine clean will improve
performance.
Keeping the battery pack attaching area clean.
Make sure that the system for attaching and connecting the battery
pack is free of dirt and grass chipping.
Do not use forced water and avoid wetting the motor or the electrical
components.
Do not use harsh products for cleaning the chassis.
14 EN
[3]
[1]

MAINTENANCE SCHEDULE

REGULAR SERVICE PERIOD (3)
Perform at every indicated month or
operating hour interval, whichever
comes first.
Cutting means bolts tightness
Cutting means
(Deformation / damage)
Grass catcher
Drive clutch cable
(HRX466XB only)
Cutting-means control cable
Drive belt
Ratchet (HRX466XB only)
Motor cooling fins
Battery location
Motor rotation condition
Overall machine outside
(1) Replace as necessary.
(2) These items should be serviced by your servicing dealer, unless you have
the proper tools and are mechanically proficient. Refer to Honda shop
manual for service procedures.
(3) For commercial use, log hours of operation to determine proper
maintenance intervals.
Every
100
Each hours of
hours of
use use or
use or 2
each
year
Check ●
Check ●
Check ●
Check ●
Adjust ●(1)
Check ●
Check
Grease ●(2)
Clean ●
Clean ●
Check ●
Check ●
Every
150
Refer to
page
year
12
7
5,11,14
11
-
12
●(1)(2) -
-
13
13
7
7