Transport; Useful Information - Honda HRG416XB Bedienungsanleitung

TRANSPORT

TRANSPORTING THE MACHINE
Ensure that isolator key and the battery pack are removed from
the machine before transporting the machine or folding handle.
To facilitate the operation:
1. Remove the grass catcher
2. Turn the handle fixing knobs [1] and fold back the handle [2].
[1]
NOTE:
While folding the handle, check that the cables are not kinked,
twisted, stretched or pinched.
LOADING THE MACHINE
CAUTION:
• To prevent losing control of or damaging the machine, do not use
the drive system when going up or down a loading ramp.
• To prevent damaging the drive system, do not engage the clutch
when the machine is rolling backwards.
• Transport the machine in normal horizontal position with its
4 wheels flat on the vehicle platform.
• We recommend that you use a loading ramp or that you get
someone to help you load and unload the machine.
• Adjust the loading ramp so that it is inclined at an angle of less
than 15° (26%).
• When transporting the machine, immobilise it using straps and
place chocks under the wheels.
• The straps must not touch the following parts of the machine:
drive clutch lever, cutting-means control lever, and all the control
cables.
16 EN
(see page 5).
15° (26%) max.

USEFUL INFORMATION

FIND AN AUTHORIZED DEALER
Please refer to the European Internet site:
http://world.honda.com/
[1]
[2]
[5]
CURRENT PARTS, OPTIONAL ATTACHMENT AND
CONSUMABLES
To buy one of the original parts listed below, or any other part,
please contact your servicing dealer.
Current parts
[1] Grass catcher 81320-VH3-R11 81320-VH4-R11 Grass catcher only
[2] Rear wheel
[3] Front wheel
[4] Standard
cutting-means 72511-VH3-R90 72511-VH4-R90
[5] Battery pack
[6] Charger
For your safety, it is strictly prohibited to install any other
attachment than the ones listed above and especially designed
for your machines' model and type.
[2]
HRG416XB HRG466XB
42710-VH3-R10 42710-VH3-R20
44710-VH3-R10
DP3640XA (Standard 4A)
DP3660XA (Standard 6A)
DPW3660XA (All weather 6A)
DPW3690XA (All weather 9A)
CV3680XA
[3]
[4]
[6]
(without frame)
Requires use of a
dynamometric key