Mowing; Operating Hints And Tips - Honda HRG416XB Bedienungsanleitung

MOWING

HRG416XB and HRG466XB are battery powered products. When
squeezing the cutting-means control lever while pressing the yellow
button, motor and cutting-means will start turning immediately.
TO ROTATE THE CUTTING-MEANS
Ensure that the charged battery pack is installed to the machine
(page 6).
1. Insert the isolator key to the motor and turn the key to ON (I)
position [1].
2. While pressing the yellow button [2], push the cutting-means
control lever [3]. The cutting-means start rotating.
[2]
3. Release the yellow button. Hold the cutting-means control lever
to keep the cutting-means rotating.
[1]
[3]
TO STOP THE CUTTING-MEANS ROTATION
1. Release the cutting-means control lever [3]. The cutting-means
rotation stops.
If you leave the machine, or stop the working, etc., do the following
step.
2. Turn the isolator key to off (O) position [4] and remove the
isolator key [5] from the motor.
[4]
Remove the battery pack if necessary

OPERATING HINTS AND TIPS

Take special care when mowing on uneven or irregular ground.
The machine may tip over and cutting-means may throw out
objects which were hidden.
Keep the 4 wheels firmly on the ground.
Control the direction of the machine using the handle and not by
exerting pressure on the cutting-means enclosure with your foot.
CAUTION:
• When mowing around an obstacle, be careful that the cutting-means
does not hit it. Never push the machine directly over an object.
• When mowing an uneven area, do not let yourself be pulled along by
the machine. Hold the handle firmly and control its movements.
[6]
[3]
[5]
(page 6).
[7]
[6] WRONG [7] RIGHT
9 EN