Safety Stickers; Identification Of Machine; General Description; Equipment Identification - Honda HRG416XB Bedienungsanleitung

SAFETY STICKERS

Your machine must be used with care. Therefore, decals have been
placed on the machine, to remind you pictorially of main precautions
to take during use. Their meaning is explained below.
These decals are considered as a part of the machine. Should one
become detached or unreadable, contact your servicing dealer for
its replacement.
We also recommend that you read the safety advice carefully
(see page 2).
Destination Europe
(PEEA, SEEA)
[1]
[2]
[1] WARNING: Read the owner's manual before using the machine.
[2] Risk of projections: Keep third persons away from the area during use.
[3] Risk of cuts. Rotating cutting-means: Do not put hands or feet inside the
cutting-means enclosure. Switch the isolator key to the off (O) position and
remove the isolator key and the battery pack before adjusting, cleaning and
before leaving the product unattended for any period. The cutting-means
continue to rotate after the motor is switched off.
[4] Do not operate without either discharge cover or grass catcher in place.

IDENTIFICATION OF MACHINE

Destination Europe (PEEA, SEEA)
[5] [6] [7] [10]
Destination Australia (PEUA, SEUA)
[12]
[5]
[5] Sound power level
[6] CE marking
[7] Rated voltage
[8] Recommended motor speed in min
[9] Mass in kilograms
[10] Year of manufacture
[11] Serial number
[12] Model - Type
[13] Name and address of the manufacturer
[14] IP code (moisture and dust ingress resistance (only guaranteed with battery
installed))
4 EN
Destination Australia
(PEUA, SEUA)
[4]
[3]
[13]
[12]
[14]
[11]
[9]
[8]
[10]
[11]
-1

GENERAL DESCRIPTION

[18]
[21]
[22]
[25]
[26]
[16]
[28]
Battery pack and charger
*Dedicated battery pack and charger
for these machine are needed for
operation. They are sold separately.
[29]

EQUIPMENT IDENTIFICATION

CONTROLS
[15] Handle
[16] Lever for adjusting the
cutting height. . . . . . . . . . . . . . . . . Selects the desired cutting height
[17] Drive clutch lever
(HRG466XB only) . . . . . . . . . . . . . Controls the transmission which
[18] Cutting-means control lever . . . . . Stops and starts the cutting-means
[19] Yellow button. . . . . . . . . . . . . . . . . Controls the motor by a dual action
[20] Grass catcher . . . . . . . . . . . . . . . . Collects the cut grass
[21] Discharge cover . . . . . . . . . . . . . . Protects from the projections
[22] Clip director (HRG466XB only) . . . Switching mulching/rear discharge
[23] Rear wheels
[24] Isolator key
[25] Battery cover
[26] Battery cover opening lever
[27] Battery indicator
[28] Motor cooling fins
[29] Battery pack
[30] Charger
Do not dispose of electric equipment together with household waste
material. If electrical appliances are disposed of in landfills or
dumps, substances can leak and react and enter into the foodchain,
damaging your health and well-being. For further information on the
disposal of this product, please contact your servicing dealer or your
nearest domestic waste collection service.
[17]
[15]
[27]
STOP
[20]
[16]
[23]
[24]
FUNCTIONS
drives the rear wheels
rotation
switch to prevent starting it accidentally
[19]
[30]