Ryobi RLM4614 Übersetzung Der Originalanleitung Seite 4

frequently.
■ Replace worn or damaged blades and bolts in sets to
preserve balance.
■ Check all nuts, bolts, and screws at frequent intervals
for proper tightness to be sure that the product is in safe
working condition.
■ Check the grass catcher frequently for wear, holes,
or deterioration. This can cause objects to be thrown
towards the operator.
■ Replace worn or damaged parts before operating the
product.
■ Never operate the product if the presence control lever,
when released, does not stop the engine.
■ The product shall not be operated without either entire
grass catcher or self-closing discharge opening guard
in place.
■ Do not use the product when there is a risk of lightning.
■ Do not force the product. It will do the job better and
safer at the speed for which it was designed.
■ Do not overload your mower. Mowing long thick grass
may cause the motor speed to drop, or the power to cut
out. When mowing in long thick grass a first cut with the
cutting height set higher will help reduce the load. See
adjusting the blade height.
■ Stop the blade when crossing gravel surfaces.
■ Do not pull the mower backward unless absolutely
necessary. If you must back the machine away from a
wall or obstruction, first look down and behind to avoid
tripping or pulling the machine over your feet.
■ Stop the blade(s) if the product has to be tilted for
transportation when crossing surfaces other than
grass, and when transporting the product to and from
the area to be mowed.
■ Never operate the product with defective guards
or shields, or without safety devices, for example
deflectors and/or grass collector, in place.
■ Start the engine carefully according to instructions and
keep hands and feet away from cutting area. Keep
clear of the discharge opening at all times.
■ Never pick up or carry a lawn mower while the engine
is running.
■ Avoid holes, ruts, bumps, rocks, property stakes, or
other hidden objects. Uneven terrain could cause a slip
and fall accident.
■ When not in use, the product should be stored in a
well-ventilated, dry, locked up place-out of the reach of
children.
■ Follow manufacturer's instructions for proper operation
and installation of accessories. Only use accessories
approved by the manufacturer.
■ Do not operate the engine in a confined space where
dangerous carbon monoxide fumes can collect.
■ Do not change the engine governor settings or over-
speed the engine.
2
■ Do not tilt the product when starting the engine or while
the engine is running. This exposes the blade and
increases the probability of objects being thrown.
■ Do not start the engine when standing in front of the
discharge chute.
■ Stop the engine, disconnect the spark plug wire, and
wait until the blade comes to a complete stop and allow
it cool before for the below case:
● whenever you leave the product unattended
● before cleaning a blockage or unclogging chute
● before checking, cleaning or working on the product
● after striking a foreign object; inspect the appliance
for damage and make repairs as necessary before
restarting and operating the machine.
● before clearing the grass catcher
■ If the product starts to vibrate abnormally (check
immediately)
● inspect for damage
● replace or repair any damaged parts
● check for and tighten any loose parts
■ If the product strikes a foreign object, follow these
steps:
● Stop the product and disconnect the spark plug
wire.
● Thoroughly inspect the product and grass catcher
for any damage.
● Repair any damage before restarting and continuing
to operate the product.
■ Allow engine to cool before storing in any enclosure.
■ To reduce the risk of fire, keep the engine, silencer, and
petrol storage area free of grass, leaves, and excessive
grease.
■ If the fuel tank has to be drained, this should be done
outdoors.
■ Disconnect the spark plug before making any
adjustment, transporting, or storing the product. Such
preventive safety measures reduce the risk of starting
the product accidentally.
■ The product is extremely noisy and permanent hearing
loss or damage may result if precautions to limit your
exposure, reduce noise, and wear hearing protection
are not strictly adhered to.
SERVICE
■ Service on the product must be performed by qualified
repair personnel only. Service or maintenance
performed by unqualified personnel could result in a
risk of injury to the user, or damage to the product.
■ When servicing, use only original manufacturer's
replacement parts. Use of unauthorised parts may
create a risk of serious injury to the user, or damage
to the product.
NOTE: Only perform the tasks listed in this manual. For
other service or repair, it should be done by a qualifi ed
person.
English