Network Management Protocol (Snmp) - axing MIP 8-00 Betriebsanleitung

3.6.11. Network Management Protocol (SNMP)

The Simple Network Management Protocol (SNMPv1 or SNMPv2c) is supported. With the help of a Network
Management Station (NMS) information can be read or alarms can be received.
Supported SNMP message types are GET-REQUEST, GETNEXT-REQUEST and TRAP.
The MIB object definition is stored in the headend. If you are connected to the headend in the network, then
you can download the file from the device.
URL = [IP address of headend] /MIB/AXING-MIB.txt
For example: 192.168.0.145/MIB/AXING-MIB.txt
SNMP Agent
 Set the Agent switch to ON to use GET-REQUEST and GETNEXT-REQUEST.
 The Agent Port is by default 161, if necessary enter another port.
 In the SNMP Version field, select version SNMPv1 or SNMPv2c. SNMPv2c is recommended.
 The Community Name (the SNMP "password") is public by default, if necessary enter a different
community name.
Traps
Traps can also be output independently of the SNMP agent.
 If traps are to be transmitted from the headend, then set the Traps switch to ON.
 Enter the Destination Address of the NMS receiving traps.
 Enter Destination Port of NMS, by default 162 is used.
2020-02-23 | Technical improvements, changes in design, printing- and other errors expected. 33