Mpts; Output Mode - axing MIP 8-00 Betriebsanleitung

Operation instructions | MIP 8-00 | MIP 16-00 | MIP 8-06 | MIP 16-06
3.5.2.

MPTS

If MPTS (Multi Program Transport Stream) is selected as the transport stream output (see 3.6.2 on page 27),
then each of the 8/16 output MPTS is individually configured.

Output mode

Choose between the following options:
•
•
•
Output Rate Choose between the following options:
•
•
•
Manual Rate
Constant bitrate input when CBR (manual) is selected.
Source port Port of the source
Destination IP IP address that must be entered as a multicast IP address for the set-top boxes or
IPTV terminals.
Destination Port Port of the destination
24
Disabled = no output transport stream
UDP = User Datagram Protocol
RTP = Real-Time Transport Protocol
VBR = compression method for variable bit rate audio and video data
CBR (auto) = compression method for constant bit rate audio and video data.
The bitrate is assigned automatically.
CBR (manual) = The bit rate is assigned manually.
2020-02-23 | Technical improvements, changes in design, printing- and other errors expected.