Front Page; Input; Outputs - axing MIP 8-00 Betriebsanleitung

3.2.

Front page

The relevant information required for the function of the system are shown on the front page. The decisive
thing is the quality of the signals at the INPUT and the utilization of the OUTPUT.
3.2.1.

Input

The bit error rate BER of all four tuners is shown on the left side. The amount of bit errors for the last
1,000,000 transferred bits is calculated. Also the LEVEL and the C/N ratio are shown.
3.2.2.

Outputs

The fill level of the output is shown. If the current fill level exceeds the maximal fill level, it may cause image
disturbances, e.g. mosaic images.
The data rates of the programmes are not constant. They are dynamically changed by the sender. To ensure an
undisturbed reception, a reserve must absolutely be observed.
We recommend you to set the maximal fill level to 90%.
From a fill level of 95%, this is indicated in red.
2020-02-23 | Technical improvements, changes in design, printing- and other errors expected. 13