2.3.
Power supply
The devices are equipped with two redundant power supplies to connect them e.g. to different power sources
(e.g. a normal mains socket and a UPS). The LEDs show the status of the power supply.
Lights green when
operating voltage OK.
Flashes red when
voltage fails.
If a power supply fails, the unit will start with an alarm tone. You can deactivate the alarm tone in the
configuration (e.g. if you operate the device only with a power supply unit).
Alternatively, you can remove the unused power supply from the device.
Connect both power supplies with the enclosed cables to 230 V AC. Open the stirrup, plug the appliance
plugs into the power supply and secure it with the stirrup.
2020-02-23 | Technical improvements, changes in design, printing- and other errors expected.
9