Initialization Phase 2; Spts - axing MIP 8-00 Betriebsanleitung

3.4.

Initialization phase 2

In the initialization PHASE 2, the found programmes are subdivided by tuner.
Depending on which transport stream output has been selected (SPTS or MPTS, see 3.6.2 on page 27), the
programs are selected in phase 2.
3.4.1.

SPTS

If SPTS (Single Program Transport Stream) is selected as the transport stream output (see 3.6.2 on page 27),
programs can be activated or deactivated in the Select column.
 With each programme you asign to an output, the data rate rises.
 The performed modifications are only taken over by the system when you click on SAVE CHANGES.
2020-02-23 | Technical improvements, changes in design, printing- and other errors expected. 17