CAMPAGNOLO HYPERON Bedienunganleitung Seite 35

• Unscrew and remove the lock ring (C - Fig. 5), press the axle (G -
Fig. 5) towards the hub body, remove the ring (F - Fig. 5), the cone
(H - Fig. 5), slide out the axle (G - Fig. 5) from the hub, remove the
cone (I - Fig. 5), the gaskets (J - Fig. 5) taking care not to damage
it and the ball bearings (K - Fig. 5).
• If it is necessary to replace the cups, contact a Campagnolo
Service Center.
• Proceed to refit the system performing disassembly operations in
reverse order.
Attention.
When inserting the axle, be careful not to move the ball bearings out
of their seats.
• Tighten the locking nut (B - Fig. 6) to a torque setting of 12 N.m -
8.8 lb.ft.
• Adjust the hub as illustrated in section 7.
14
5
C F J H K
6
B
12 N.m - 8.8 lb.ft
K J I G