CAMPAGNOLO HYPERON Bedienunganleitung Seite 29

• Unscrew the locking nut (B - Fig. 4) with a fully inserted 5 mm Allen
wrench; counter the rotation of the axle with another 5 mm Allen
wrench fully inserted on the opposite end of the axle itself.
• Align the screw (D - Fig. 5) of the lock ring (C - Fig. 5) with the
groove (E - Fig. 5) on the hub body.
• Using a 2.5 mm Allen wrench, slacken the screw by 3 turns (D -
Fig. 6).
• Unscrew and remove the lock ring (C - Fig. 7), remove the ring
(F - Fig. 7), then slide out the axle (G - Fig. 7).
5
D
C
E
8
6
D
4
B
7
C F
G