Disassembly, Assembly And Lubrication Of Hubs - CAMPAGNOLO HYPERON Bedienunganleitung

6. DISASSEMBLY, ASSEMBLY AND LUBRICATION OF HUBS

HYPERON wheel hubs do not have lubrication holes, so they have
to be removed to perform this operation.
6.1 - DISASSEMBLY AND ASSEMBLY OF THE FRONT HUB.
• Using a stiff blade (such as small knife) positioned as indicated in
fig. 1 and taking care not to damage the hub or the spokes, remove
the side covers (A) from the hub.
• Unscrew the locking nut (B - Fig. 2) with a fully inserted 5 mm Allen
wrench; counter the rotation of the axle with another 5 mm Allen
wrench fully inserted on the opposite end of the axle itself.
• Align the screw (D - Fig. 3) of the lock ring (C - Fig. 3) with the
groove (E - Fig. 3) on the hub body.
• Using a 2.5 mm Allen wrench, slacken the screw by 3 turns (D -
Fig. 4).
2
B
1
A
3
D
C
E
A
4
D
13