CAMPAGNOLO HYPERON Bedienunganleitung Seite 27

• For every spoke (Fig. 3):
- insert the new spoke in the hole in the new rim.
- insert the plate, positioning the longest side longitudinally compared
with the rim rotation direction.
- tighten the nut.
Attention.
After completing the operation, check that the flat spoke (aero) is
oriented in an aerodynamic position (Fig. 4).
WARNING!
When fitting the wheel, check that the plates remain
in position since an incorrectly positioned plate may
caused irreparable damage to the profile of the rim when
tensioning the spokes. This damage could cause the rim to
unexpectedly fail, resulting in an accident (Fig. 3).
• Perform these operations for all spokes.
Following the operations described in Section 5 of the "Owner's
Manual - PART 1":
• Tighten and Settle the Spokes.
• Check centering and wheel dishing.
6
3 4
OK! NO!