Selecting The Dvi Output Range; Setting The Hdmi Audio; Disc Setup Menu; Selecting The Default Audio/Subtitle/Dvd Menu Language - Yamaha DVD-S1800 Bedienungsanleitung

y
• Refer to the manual supplied with your monitor to select the
appropriate aspect ratio.
• You can also select the HDMI resolution by pressing HDMI on
the remote control repeatedly.

Selecting the DVI output range

You can select the DVI output range to match the
connected component. This function is only available
when this unit is connected to an DVI-D-compatible
component via the HDMI jack.
• Select [DVI Output Range] in [HDMI] menu.
Standard
Select this if you cannot see the correct image when you
select [Enhanced].
Enhanced
Select this if black and white in the image is not distinct.

Setting the HDMI audio

Set the HDMI audio output to match the connected
component. This function is only available when this unit
is connected to an HDMI-compatible component via the
HDMI jack.
For details about the relationship between the audio
format and the setting, see "HDMI audio output" on
page 13.
• Select [HDMI Audio] in [HDMI] menu.
Auto
Select this to set this unit to the best setting automatically
based on the component you have connected via the
HDMI jack.
PCM
Select this to output the decoded multi-channel or 2ch
linear PCM audio signals via the HDMI jack.
Off
Select this to turn off the HDMI audio output.
Notes
• SA-CD signals cannot be output using HDMI.
• When [HDMI Audio] is set to [Auto] or [PCM], digital output
signals are muted.

DISC setup menu

SETUP
GENERAL
AUDIO Language
Subtitle Language
AUDIO
DVD Menu Language
SPEAKER
Angle Mark
PBC
VIDEO
Time Interval
HDMI
DISC
Move :
Selecting the default audio/subtitle/
DVD menu language
These menus contain various language options for the
audio, subtitles and disc menus recorded on the DVD. For
details, see "Setting the audio, subtitle and disc menu
languages" on page 17.

Selecting an angle mark display

You can switch an angle mark display on or off when
sequences recorded from different camera angles are
played back.
• Select [Angle Mark] in [DISC] menu.
On
Select this if you want to display an angle mark. An angle
mark is displayed continuously.
Off
Select this if you do not want to display an angle mark. An
angle mark appears for five seconds, and then disappears.
SETUP MENU
1/1
Select : Enter
Return
37
En