Product Specifications - Hitachi PD1 Handbuch

PRODUCT SPECIFICATIONS

I Product specifications and designs are subject to change without notice.
Type
Display
dimensions
Panel
Resolution
Input
terminals
Input
signals
Video
signals
Sync
signals
Video output Signal
Recommended Signal
Audio output terminal
Input power
External dimensions
Mass
Temperature Operating : 5˚C to 35˚C, Storage : 0˚C to 40˚C
Ambient
Relative
conditions
humidity
• The monitor takes at least 30 minutes to attain the status of optimal picture quality.
PD1 (42HDW10)
Approx. 42 inches (922 mm (H), vertical 522 mm (V), diagonal 1059 mm)
1024 (H) x 1024 (V) pixels
RGB input
RGB one-line two input terminals
(D-sub 15-pin) (BNC)
RGB audio two-line two input terminals
(3.5mm Stereo mini jack)
0.7 V/1.0 Vp, analog RGB
(horizontal: 24kHz to 107kHz,
vertical: 50Hz to 85Hz) 1080/50i, 1080/60i
H/V separate, TTL level
H/V composite, TTL level
Sync on green, 0.3 Vp-p
-
27 modes 29
8W + 8W (8Ω)
AC100 - 120 / 200 - 240V(automatically selected) 4A / 2.2A
Power consumption 360W (Sound off)
1030 (W) x 636 (H)x 89 (D) (mm) (excluding the stand)
31kg (excluding the stand), 35kg (When mounted on optional stand.)
Operating : 20% to 80%, Storage : 20% to 90% (non-condensing)
Video 1 video input terminal (BNC)
Video 1 audio input terminals (left, right)
(left, right) Video 1 S video input terminal (S)
Video 2 video input terminals
Video 2 audio input terminals (left, right)
NTSC, NTSC-4.43, M-PAL, PAL, N-PAL,
SECAM, 480/60i, 480/60p, 720/60p,
1080/60i, 1035/60i, 575/50i
[2KΩ] -
[2KΩ] -
[75Ω] -
Through output (BNC) for VIDEO1 input signals.
10 modes 30
VIDEO input
(RCA)
(Y) (Pb/Cb) (Pr/Cr) (BNC)
(RCA)
27