Other Features; Automatic Store - Hitachi PD1 Handbuch

OTHER FEATURES

Automatic Store

I Approximately 1 sec. after adjustment is completed, the adjustments will be
recorded as shown in the table below.
Item
Sound volume
Sound balance
Treble
Bass
Mute volume
Input status automatic
display
Line correction
Three-dimensional Y/C
separation
HD signal
Language selection
Contrast
Brightness
Color temperature
Gamma correction
Input signal level
Color
Tint
Sharpness
Video enhance
Display area
Display size
Horizonal position
Vertical position
Dot clock frequency
Dot clock phase
Verical size
• The previously recorded items will be lost.
• The signal mode can be identified by the horizontal/vertical sync frequency and the sync
signal polarity. Different signals with which all the elements are the same or similar will be
handled as the same signal.
• RGB1 and RGB2 inputs have common elements that can be recorded for each signal mode.
Because of this, when the contents are recorded with RGB1 (or RGB2), there may be loss
of adjustment during RGB2 (or RGB1) reception in the same signal mode.
20
Display
VOLUME
BALANCE
TREBLE
BASS
MUTE LEVEL
AUTO FREQ.
LINE INTP.
3D COMB
COMPONENT
LANGUAGE
CONTRAST
BRIGHTNESS
COLOR SELECT
GAMMA
VIDEO LEVEL
COLOR
TINT
SHARPNESS
VIDEO ENHANCE
DISPLAY AREA
DISPLAY SIZE
H.POSITION
V.POSITION
CLOCK
PHASE
V. SIZE
Registration
condition
One set can be recorded.
One set can be recorded
during common RGB1,
RGB2 input; one set of
two can be recorded
during normal signal
reception with common
VIDEO 1, VIDEO 2 input.
One set can be recorded
during common VIDEO 1,
VIDEO 2 input.
One group can be
recorded for each signal
mode.
Reproduction
condition
During normal signal
reception.
During normal signal
reception.
During normal signal
reception.
During recording and when
the same signal mode is
detected.