Specifications - Hitachi CMP5000WXE Bedienungsanleitung

Additional Information

Specifications

General
Light emission panel ............ 50 inch plasma display panel
Number of pixels .............................................. 1280 x 768
Power supply ............................. AC 100 - 240 V, 50/60 Hz
Rated current ................................................. 3.8 A - 1.6 A
Standby power consumption ...................................... 1 W
External dimensions ........ 1218 (W) x 714 (H) x 98 (D) mm
Weight .................................................................... 38.9 kg
Operating temperature range .............................. 0 to 40°C
Operating atmospheric pressure range .... 800 to 1100 hPa
Input/output
Video
INPUT 1
Input Mini D-sub 15 pin (socket connector)
RGB signal (SYNC ON G compatible)
RGB ... 0.7 Vp-p/75 Ω/no sync.
HD/CS, VD ... TTL level
/positive and negative polarity
/2.2 kΩ
SYNC ON G
... 1 Vp-p/75 Ω/negative sync.
*Compatible with Microsoft's Plug & Play
(VESA DDC1/2B)
Output Mini D-sub 15 pin (socket connector)
75 Ω/with buffer
INPUT 2
Input BNC jack (x5)
RGB signal (SYNC ON G compatible)
RGB ... 0.7 Vp-p/75 Ω/no sync.
HD/CS, VD ... TTL level
/positive and negative polarity/
75 Ω or 2.2 kΩ
(impedance switch)
SYNC ON G ...
1 Vp-p/75 Ω/negative sync.
30
En
Audio
Input AUDIO INPUT (for INPUT 1/2)
Stereo mini jack
L/R ... 500mVrms/more than 10 kΩ
Output AUDIO OUTPUT
Stereo mini jack
L/R ... 500mVrms (max)/less than 5 kΩ
SPEAKER
L/R ... 8 – 16 Ω/2W +2W (at 8 Ω)
Control
RS-232C ... D-sub 9 pin (pin connector)
COMBINATION IN/OUT
... Mini DIN 6 pin (x2)
CONTROL IN/OUT ... monaural mini jack (x2)
Accessories
Remote control unit ......................................................... 1
AA (R6) batteries .............................................................. 2
Speed clamps ................................................................... 2
Bead bands ...................................................................... 2
USER'S MANUAL ............................................................ 1
Power cord ....................................................................... 1
Ferrite core ....................................................................... 1
Cable tie ........................................................................... 1
÷ Due to improvements, specifications and design are subject to
change without notice.