Hitachi PD1 Handbuch Seite 50

OPERATING INSTRUCTIONS (continued)
On-Screen Display System
I Press the MENU button to open an MAIN MENU allowing you to complete
various adjustments and settings using the SELECT buttons (The
keys of the remote controller or the SELECT or VOLUME button of the main
unit.).
• Press the SELECT button of the main unit
( or key of the remote controller) to
select an item by moving the pink text.
• Press the VOLUME button and the L and
M keys of the main unit (
the remote control) to adjust or set the
selected item, or to switch the menu.
• When a choice is followed by ":", it
indicates that the choice can be adjusted
or changed.
• When a choice is followed by
can be opened by pressing the remote-
controller SELECT button
unit SELECT button and VOLUME
button L.
• When [RETURN] is selected, press the
remote-controller button SELECT
the main unit SELECT button and
VOLUME button M to exit to the
original menu
• For information on adjusting and setting
choices, see
13
I Press the MENU button once again to
exit the MAIN MENU.
• The MAIN MENU will close automatically
when no keys are entered for 10 seconds.
HINTS
12
or key of
, a menu
or the main
to .
19
• Image retention can occur if the same image is displayed for an
extended time. To reduce this possibility, change the display
contents at suitable intervals.
You are recommended to use the built-in screen saver function.
• If special images created on a PC or any other equipment (such as
those composed of a checker-flag pattern) are displayed across the
screen, the hue may be varied depending on the contrast or
brightness setting.
Remote
controller
MENU
Main unit
MENU
SELECT
or
VOLUME
, , , and
Pink
MAIN MENU
PICTURE
SOUND
DISPLAY
FUNCTION
Menu selection mark
Pink when brightness
is selected
PICTURE MENU
CONTRAST : 127
BRIGHTNESS : 0
COLOR : 0
TINT : 0
SHARPNESS : 0
PICTURE MODE : SUPER
OPTIONS
RETURN
Guidance