Hitachi PD1 Handbuch Seite 53

DISPLAY MENU (RGB)
Selected characters
DISPLAY AREA
AUTO ADJUST *
INTERPOLATION
WIDE MODE
**
DISPLAY INIT.
* Depending on the type of signal displayed, displays may not be optimized through
automatic adjustment. Apply MANUAL ADJUST to optimize them.
* 1080/60i signal doesn't exit the display of AUTO ADJUST. Apply MANUAL ADJUST in
this case.
** When WIDE MODE is set to ON, the display area mode becomes FULL and switching of
the size is not possible.
Displays According to Selected DISPLAY AREA (RGB input)
Resolution
Display
640 X 480 (VGA)
800 X 600 (SVGA)
1024 X 768 (XGA)
1280 X 1024 (SXGA)
1600 X 1200 (UXGA)
• Signal processing is carried out for compression (pixel thinning) or zoom, etc. for the above
signal displays.
MAIN MENU
PICTURE
SOUND
DISPLAY
FUNCTION
NORMAL FULL
ADJUST OK?
Set to YES.
Set to DOUBLE.
Set to OFF.
INITIALIZE?
Set to YES.
Clears all DISPLAY MENU
adjustment values exept
DISPLAY AREAand exits to
the DISPLAY MENU.
Overall display
FULL
RGB
DISPLAY MENU
DISPLAY AREA : NORMAL
AUTO ADJUST
MANUAL ADJUST
INTERPOLATION : LINEAR
WIDE MODE : OFF
DISPLAY INIT.
RETURN
NORMAL
ZOOM
Set to NO.
Set to LINEAR.
Set to ON.
Set to NO.
Exits to the DISPLAY
MENU, without clearing
the menu adjustment
values.
Partial display
NORMAL
X
Y
SXGA
X : Y = 5 : 4
Others
X : Y = 4 : 3
Setup hint
Set to FULL to display
images across the screen
for gaining an overview of
the overall images.
Adjusts the CLOCK,
PHASE, etc. automatically.
Set to DOUBLE to see
characters or images crisp
or to LINEAR to view them
smooth.
Only displayed when VGA
(60 Hz) or WIDE VGA
signals are input. Natural
images can be enjoyed
when set to ON when WIDE
VGA signals are input. Set
to OFF when VGA (60 Hz)
signals are input.
Clear the user signal preset
data.
21
16
ZOOM
Data area
The V.Posi
setting allows
for upward and
downward
scrolling.
15