Product Specifications - Hitachi PD1 Handbuch

• Product specifications and designs are subject to change without notice.
Type PDt (42HDW10)
Display Approx. 42 inches (922 mm (H), vertical 522 mm (V), diagonal t 059 ram)
Panel dimensions
Resolution 1024 (H) x 1024 (V) pixels
RGB input VIDEO input
RGB one-line two input terminals Video 1 video input terminal (BNC)
(D-sub 15-pin) (BNC) Video 1 audio input terminals (left, right)
Input RGB audio twodine two input terminals (RCA)
terminals (left, right) Video 1 S video input terminal (S)
(3.5ram Stereo mini jack) Video 2 video input terminals
(Y) (Pb/Cb) (Pr/Cr) (BNC)
Video 2 audio input terminals (left, right)
Input (RCA)
signals
Video 0.7 V/1.0 Vp, analog RGB NTSC, NTSC-4.43, M-PAL, PAL, N-PAL,
horizontal: 24kHz to 107kHz, SECAM, 480/60i, 480/60p, 720/60p,
signals vedical: 50Hzto 85Hz) 1080/50i, 1080/60i t080/60i, 1035/60i, 575/50i
H/V separate, TTL level [2K-_]
Sync H/V composite, TTL level [2K_]
signals
Sync on green_ 0.3 Vp-p [75_]
Through output (BNC) for VIDE01 input signals.
->7modes [2_] 10 modes _3_1
8w + 8w (8_)
AC100 - 120 / 200 _ 240V(automatically selected) 4A / 2.2A
Power consumption 360W (Sound off)
1030 (W) x 636 (H)x 89 (D) (mm) (excluding the stand)
31 kg (excluding the stand), 35kg (When mounted on optional stand.)
Operating : 5'C to 35"C, Storage : 0C to 40C
o ,> ,> ,>
Operating : 20 Jo to 80 Yo,Storage : 20 Yoto 90 Yo(non-condensing)
Video output Signal
:=ecommended Signal
Audio output terminal
Input power
External dimensions
Mass
Temperature
Ambient
conditions Relative
humidity
• The monitor takes at ]east 30 minutes to attain the status of optimal picture quality.
27