General Description; Function Description; Overview; Scope Of Delivery - FLORABEST FHT 600 A1 Originalbetriebsanleitung

General Description

See the front fold-out page for
illustrations.

Function Description

The electric hedge trimmer is driven by
an electronic motor. The equipment is
double-insulated for safety and does not
require earthing.
The hedge trimmer is equipped with a
double-sided safety cutter bar. When
cutting, the blades move backwards and
forwards in linear motion. The impact pro-
tection on the tip of the cutter bar prevents
unpleasant recoils should the trimmer
come into contact with walls, fences and
so on.
The unit can only be operated with the
deadman switch depressed, in order to
protect the operator. In addition, the hand
guard protects against branches and bri-
ars.
Please note the following descriptions for
the function of the operating components.

Overview

1 Contact protection guard with
A
predrilled holes for hanging the
trimmer up
2 Safety blade
3 Hand protection
4 Loop grip with deadman switch
5 Vents
6 On/off switch
7 Tension relief
8 Grip
9 Mains cable
10 Blade protection with predrilled
holes for hanging the trimmer up

Scope of delivery

Unpack the device and check it for com-
pleteness.
- Electric hedge trimmer
- Hand protection with 2 screws included
- Blade protection
Mounting the Hand Pro-
tection
Pull out the power plug before car-
rying out any work on the equip-
ment.
Use only original parts.
B 1. Slide the hand protection (3)
onto the equipment and secure
in place using the screws on
either side of the unit.
Operating the Hedge
Trimmer
Do not use the equipment without
the hand guard. Wear suitable
clothing and work gloves when
working with the equipment.
Ensure that the equipment is
functional before each use. The
On/Off switch and the safety
switch must not be held closed.
They must switch off the motor
when on is released. Should a
switch be damaged, stop working
with the equipment. Ensure that
the mains voltage value matches
the label on the equipment.
Note noise protection and local
specifications.
GB MT
39