General Description; Function Description; Overview; Scope Of Delivery - FLORABEST FHT 600 A1 Originalbetriebsanleitung

GB
Before use, check that the blades
are sharp. Ensure that the blades
are sharpened whenever blunt, in
order to avoid overstressing of the
machine. Damages caused by cut-
ting with blunt blades are not cov-
ered by the guarantee.

General Description

See the front fold-out page for
illustrations.

Function Description

The electric hedge trimmer is driven by
an electronic motor. The equipment is
double-insulated for safety and does not
require earthing.
The hedge trimmer is equipped with a
double-sided safety cutter bar. When
cutting, the blades move backwards and
forwards in linear motion. The impact pro-
tection on the tip of the cutter bar prevents
unpleasant recoils should the trimmer
come into contact with walls, fences and
so on.
The unit can only be operated with the
deadman switch depressed, in order to
protect the operator. In addition, the hand
guard protects against branches and bri-
ars.
Please note the following descriptions for
the function of the operating components.
8

Overview

1 Contact protection guard
A
2 Safety blade
3 Hand protection
4 Loop grip with deadman switch
5 Vents
6 On/off switch
7 Tension relief
8 Grip
9 Mains cable
10 Blade protection

Scope of delivery

Unpack the device and check it for com-
pleteness.
- Electric hedge trimmer
- Hand protection with 2 screws included
- Blade protection
Mounting the Hand Pro-
tection
Pull out the power plug before car-
rying out any work on the equip-
ment.
Use only original parts.
B Slide the hand protection (3) onto
the equipment and secure in place
using the screws on either side of
the unit.