Switching On And Off; Maintenance And Cleaning; Disposal - Parkside PBH 1500 E5 Originalbetriebsanleitung

Switching on and off

Switching the appliance on:
♦ Press the ON/OFF switch
Switching the appliance off:
♦ Release the ON/OFF switch

Maintenance and cleaning

WARNING! RISK OF INJURY! Switch
the appliance off and pull out the
mains plug before starting any work
on the appliance.
■ The appliance must always be kept clean, dry
and free from oil or grease .
■ Use a soft, dry cloth to clean the housing .
■ Clean the tool holder
♦ To do this, pull the locking collar
and pull the dust protector cap off the tool
holder .
♦ Before fitting a tool into the tool holder
grease it lightly .
WARNING!
■ If the mains cable needs to be replaced, this
must be carried out by the manufacturer or
an authorised representative in order to avoid
safety hazards .
Fill the hammer mechanism housing with
grease.
■ Check regularly (at least every 50 operating
hours) to ensure there is enough grease in the
hammer mechanism housing .
♦ Open the hammer drill housing cover
hammer mechanism housing with the aid of the
face spanner .
All moving parts in the hammer mechanism must
be coated in a layer of grease .
♦ Refill with sufficient grease until all machine
parts are completely coated .
♦ Close the hammer drill housing cover
hammer mechanism housing with the aid of the
face spanner .
PBH 1500 E5
.
.
regularly .
backwards
,
on the
on the

Disposal

The packaging is made from environmen-
tally friendly material and can be
disposed of at your local recycling plant .
Do not dispose of power tools in
your normal domestic waste!
European Directive 2012/19/EU requires that
worn-out power tools be collected separately and
recycled in an environmentally compatible manner .
Your local community or municipal authorities can
provide information on how to dispose of the worn-
out appliance .
Dispose of the packaging in an
environmentally friendly manner .
Note the labelling on the packaging
and separate the packaging material
components for disposal if necessary .
The packaging material is labelled
with abbreviations (a) and numbers
(b) with the following meanings:
1–7: plastics,
20–22: paper and cardboard,
80–98: composites
Your local community or municipal
authorities can provide information
on how to dispose of the worn-out
product .
GB │ IE │ 17 ■