Symmetry Surgical Symmetry Sharp Kerrison Bedienungsanleitung Seite 5

4. Open the handle to lock the lever in place with the lever remaining in the up position.
WARNING: Handle the working end of the tips with care; the jaws (cups) are sharp and can cause injury.
Symmetry Sharp Kerrison
use) and the Symmetry Sharp Kerrison
1. Remove the tips from the sterile package.
Leave the protective tube in place on the jaws
of the tips to protect hands and gloves. The
shaft keys will be protruding from the tube. If
insertion without the protective tube is
necessary, use sterile gauze around the jaws
of the tips to protect hands and gloves.
2.
Depress the safety-locking lever on the
underside of the Symmetry Sharp Kerrison
Handle (See Figure 2).
3. While continuing to depress the safety-locking
lever, with the jaws of the tips correctly
oriented, insert the tip shaft keys into the
receptacles in the handle
(See Figure 3). Push the tips in until a double-
clicking sound is heard and they are firmly
attached to the handle. The tip shafts can be
inserted either together or singly until they are
fully seated (See Figure 4).
4. Release the safety-locking lever.
LCN 206835-001 Rev I
® Tips (sterile, single-
® Handle
®
Reusable Tips for the Symmetry Sharp Kerrison
and the Symmetry Sharp Kerrison
1. Prepare tips for insertion into the handle. If the tip
components are not already mated, mate the top and
bottom tip components properly by ensuring the lot
number, mating number, and product size marked on
the top and bottom components match. Use sterile
gauze around the jaws of the tips to protect hands and
gloves.
Top tip component size marking:
Bottom tip component size marking:
2. Depress the safety-locking lever on the underside of the
Symmetry Sharp Kerrison
3. While continuing to depress the safety-locking lever,
with the jaws of the tips correctly oriented, insert the tip
shaft keys into the receptacles in the handle
(See Figure 3). Push the tips in until a double-clicking
sound is heard and they are firmly attached to the
handle. The tip shafts can be inserted either together or
singly until they are fully seated (See Figure 4).
4. Release the safety-locking lever.
® Handle
® Handle
Lot Mating
Number Number
 
® Handle (See Figure 2).
Page 4 of 15