Tyre Mounting - Cormach CM 646 Handbuch Für Gebrauch Und Wartung

TYRE MOUNTING

WARNING
Always check that the size of the tyre is
compatible with the size of the wheel
before proceeding with mounting.
- Before you start with tyre mounting op-
erations, apply a liberal amount of tyre
manufacturer approved rubber lubricant
to both beads (fig.19).
Lubricated beads require less force to
mount/seat and are protected against
torsional damage.
56
Make sure that the tyre is in good condi-
tion without any signs of undue wear or
damage.
- Place the tyre over the wheel and tilt the
tower forward. Position the bottom bead
(fig.20) beneath the right hand side of the
mount/demount head.
18
19
20
CM 646 - CM 646 GT