Introduction - Cormach CM 646 Handbuch Für Gebrauch Und Wartung

INTRODUCTION

The purpose of this manual is to furnish the
owner and operator of this machine with a
set of practical and safe instructions for the
use and maintenance of the tyre changers.
Follow all the instructions carefully and your
tyre changer will assist you in your work and
give lasting and efficient service in keeping
with costructor's traditions.
The following paragraphs define the levels
of danger regarding the machine associ-
ated with the warning captions found in
this manual:
DANGER
Refers to immediate danger with the risk
of serius injury or death.
WARNING
Dangers or unsafe procedures that can
cause serious injury or death.
ATTENTION
Dangers or unsafe procedures that can
cause minor injuries or damage to prop-
erty.
Read these instructions carefully before
powering up the machine. Conserve this
manual and all illustrative material sup-
plied with the machine in a folder near the
tyre changer where it is readily accessible
for consultation by the machine operator.
The technical documentation supplied is
considered an integral part of the machine;
in the event of sale all relative documenta-
tion must remain with the jack.
The manual is only to be considered valid
for the machine of the model and with the
serial number indicated on the nameplate
carried by the machine.
WARNING
Adhere to the contents of this manual: the
costructor declines all liability in the case
of actions not specifically described and
authorised in this manual.
NOTE
Some of the illustrations in this manual have
40
been taken from photographs of prototypes;
the standard production model may differ
slightly in certain respects.
These instructions are for the attention of
persons with basic mechanical skills. We
have therefore condensed the descriptions
of each operation by omitting detailed
instructions regarding, for example, how
to loosen or tighten the fixing devices on
the machine. Do not attempt to perform
operations unless properly qualified and
with suitable experience. In case of need,
please contact our nearest authorised
Service Centre for assistance.
CM 646 - CM 646 GT