Hoisting / Moving; Installation Clearances; Ambient Conditions In The Place Of Operation - Cormach CM 646 Handbuch Für Gebrauch Und Wartung

HOISTING / MOVING

To remove the machine from the pallet,
sling it as shown in figure 3.
This lifting point must be used whenever
you need to change the position of the
machine. Do not attempt to move the ma-
chine until it has been disconnected from
the electrical and air networks.
INSTALLATION
CLEARANCES
WARNING
Choose the place of installation in strict
observance of local regulations regarding
safety in the workplace.
IMPORTANT: for correct, safe use of the
equipment, users must ensure a lighting
level of at least 300 lux in the place of use.
CM 646 - CM 646 GT
ATTENTION
If the machine is to be installed outdoors,
it must be properly protected from adverse
weather by a roof.
Place the tyre changer in the designated
work position observing the minimum
clearances shown in figure 4.
3
Ambient conditions in the
place of operation
- Relative humidity from 30% to 95% without
condensation.
- Temperature range from 0°C to 50°C.
ATTENTION
The machine must not be operated in
potentially explosive atmosphere.
4
43