Yamaha RX-V1900 Bedienungsanleitung Seite 108

Troubleshooting
W-3:LEVEL ERROR
Notes
• If the "ERROR" or "WARNING" screens appears, check the cause of the problem, then run "
• If warning message "W-2" or "W-3" appears, the adjustments are made, however the adjustment may not be optimal.
• Depending on the speakers, warning message "W-1" may appears even if the speaker connections are correct.
• If error message "E-10" occurs repeatedly, contact a qualified Yamaha service center.
104
En
The difference of volume level among
speakers is excessive.
Readjust the speaker installation so that all
speakers are set in locations with similar
conditions.
Check the speaker connections.
Use speakers of similar quality.
Adjust the output volume of the subwoofer.
" again.
AUTO SETUP
—
12
—
29