Connecting A Multi-Format Player Or An; Using Remote In/Out Jacks - Yamaha RX-V1900 Bedienungsanleitung

Connections
[4] SUR.BACK/PRESENCE PRE OUT jacks
Surround back or presence channel output jacks. When
you only connect one external amplifier for the surround
back channel, connect it to the SINGLE (SB) jack.
y
• To output surround back channel signals at these jacks, set
"PRESENCE SP" to "NONE" and "SUR.B L/R SP" to any
parameter except "NONE" (page 68).
• To output presence channel signals at these jacks, set
"PRESENCE SP" to "YES" and "SUR.B L/R SP" to "NONE"
(page 68).
[5] SUBWOOFER PRE OUT jack
Connect a subwoofer with a built-in amplifier.

■ Connecting a multi-format player or an

external decoder
This unit is equipped with 6 additional input jacks
(FRONT L/R, CENTER, SURROUND L/R and
SUBWOOFER) for discrete multi-channel input from a
multi-format player, external decoder, etc. If you set
"INPUT CH" to "8ch" (page 75), the analog audio input
jacks assigned as "FRONT" can be used as the front
channel input jacks.
Notes
• When you select "MULTI CH" as the input source, the digital
sound field processor is automatically disabled.
• Since this unit does not redirect signals input at the MULTI CH
INPUT jacks to accommodate for missing speakers, connect at
least a 5.1-channel speaker system when using this feature.
( ) ( C)
MD/
TAPE
*
CENTER FRONT(6CH) SURROUND
SUB
SB(8CH)
WOOFER
MULTI CH INPUT
L R
Multi-format player/
External decoder
* The analog audio input jacks assigned as "FRONT" in
"MULTI CH" (page 75).
22
En
L
R
L
R
SUB
L R L R
■ Connecting a Yamaha iPod universal
dock or Bluetooth wireless audio
receiver
This unit is equipped with the DOCK terminal on the rear
panel that allows you to connect a Yamaha iPod universal
dock (such as YDS-11, sold separately) or Bluetooth
wireless audio receiver (such as YBA-10, sold separately).
Connect a Yamaha iPod universal dock or Bluetooth
receiver to the DOCK terminal on the rear panel of this
unit using its dedicated cable.
Yamaha iPod universal dock or
Bluetooth wireless audio
receiver

■ Using REMOTE IN/OUT jacks

When the components are the Yamaha products and have
the capability of the transmission of the remote control
signals, connect the REMOTE IN and REMOTE OUT
jack to the remote control input and output jack with the
monaural analog mini cable as follows.
REMOTE
Remote
control out
Infrared signal
receiver or
Yamaha
component
DOCK
IN OUT
Remote
control in
Yamaha
component
(CD or DVD
player, etc.)