Advanced Setup; Using The Advanced Setup Menu - Yamaha RX-V1900 Bedienungsanleitung

This unit has additional menus that are displayed in the front panel display. The advanced setup menu offers additional
operations to adjust and customize the way this unit operates. Change the initial settings (indicated in bold under each
parameter) to reflect the needs of your listening environment.
Notes
• Only A MASTER ON/OFF, O STRAIGHT and the N PROGRAM selector are effective while you are using the advanced setup
menu.
• All the other operations cannot be made while you are using the advanced setup menu.
• The advanced setup menu is only available in the front panel display.

Using the advanced setup menu

Press A MASTER ON/OFF on the front
1
panel to release it outward to the OFF
position to turn off this unit.
Press and hold O STRAIGHT and then
2
press A MASTER ON/OFF inward to the ON
position to turn on this unit.
This unit turns on, and "ADVANCED SETUP"
appears in the front panel display.
While holding
down
STRAIGHT
EFFECT
Rotate the N PROGRAM selector to select
3
the parameter you want to adjust.
Press O STRAIGHT repeatedly to change
4
the selected parameter setting.
Press A MASTER ON/OFF to release it
5
outward to the OFF position to save the new
setting and turn off this unit.
y
The settings you made are reflected next time you turn on this
unit.
■ Speaker impedance
Use this feature to set the speaker impedance of this unit
so that it matches that of your speakers.
Choice
8ΩMIN Select this setting to set the speaker impedance to
8 Ω. The impedance of each speaker must be 8 Ω
or higher.
6ΩMIN Select this setting to set the speaker impedance to
6 Ω. The impedance of each speaker must be 6 Ω
or higher (front speakers only: 4 Ω or higher).

Advanced setup

MASTER
SPEAKER IMP.
Descriptions
■ Remote sensor
Use this feature to activate or deactivate the signal-
receiving capability of the remote control sensor on the
front panel of this unit.
Choice
ON
Select this setting if you want to activate the
signal-receiving capability of the remote control
sensor.
OFF Select this setting if you want to deactivate the
signal-receiving capability of the remote control
sensor.
Note
We recommend setting the parameter to "ON" in most cases.
■ Wake on RS-232C access
RS-232C STANDBY
Use this feature to set this unit to transmit data via the RS-
232C interface when this unit is in the standby mode.
Choice
YES Select this setting to set this unit to transmit data
via the RS-232C interface.
NO Select this setting to set this unit not to transmit
data via the RS-232C interface.
Initial setting:
[U.S.A. and Canada models]: YES
[Other models]: NO
■ Remote control ID setting
REMOTE CON AMP
Use this feature to set the remote control ID of this unit for
remote control recognition.
Choice
ID1
Select this setting when the ID of the remote
control is set to "ID1"
ID2 Select this setting when the ID of the remote
control is set to "ID2"
Setting remote control ID
Use this feature to set the remote control ID. This feature
is useful when you control multiple Yamaha AV receiver
or amplifier with using the remote control.
REMOTE SENSOR
Descriptions
Functions
Descriptions
93
En