Using Ipod; Controlling Ipod - Yamaha RX-V1900 Bedienungsanleitung

Once you have stationed your iPod in a Yamaha iPod universal dock (such as YDS-11, sold separately) connected to the
DOCK terminal of this unit (page 22), you can enjoy playback of your iPod using the supplied remote control. You can
also use the Compressed Music Enhancer mode of this unit to enhance the sound quality of the compression artifacts
(such as the MP3 format) stored on your iPod (page 43).
Notes
• This unit supports iPod touch, iPod (Click Wheel, including iPod classic), iPod nano and iPod mini.
• Some features may not be compatible depending on the model or the software version of your iPod.
• Some features may not be compatible depending on the model of your Yamaha iPod universal dock. The following description is
based on using YDS-11.
y
• Once the connection between your iPod and this unit is complete, "iPod connected" appears in the front panel display.
• For details about status messages displayed in the front panel display and in the OSD, see "iPod" (page 101).
• You can select whether or not this unit charges the battery of the stationed iPod when this unit is in the standby mode by configuring
the "STANDBY CHARGE" setting (page 74).
Before performing the following operations, set the operation
mode selector on the remote control to E SOURCE and then
press 3DOCK.

Controlling iPod™

You can control your iPod when "DOCK" is selected as
the input source. The operations of your iPod can be done
with the aid of the OSD of this unit (menu browse mode)
or without it (simple remote mode).
■ Remote control operation
Button
8 ENTER
Subsequent menu
k
Menu up
n
Menu down
l
Previous menu
h
Subsequent menu
0 ll
Search backward (Press and hold)
hh
Search forward (Press and hold)
a
Skip forward
b
Skip backward
s
Stop
e
Pause (Menu browse mode)
Play/Pause (Simple remote mode)
p
Play (Menu browse mode)
Play/Pause (Simple remote mode)
J DISPLAY
Display
52
En

Using iPod™

Function
■ Controlling iPod in the simple remote
mode
You can perform the basic operations of your iPod (play,
stop, skip, etc.) using the supplied remote control without
the aid of the OSD of this unit.
y
Operations can be also done with the controls on your iPod.
■ Controlling iPod in the menu browse
mode
You can perform the advanced operations of your iPod
using the supplied remote control with the aid of the OSD
of this unit.
You can also browse the songs and videos stored on your
iPod in the OSD.
Further, you can change or adjust settings for your iPod to
suit your personal preferences.
y
You can configure the display settings with "DISPLAY SET"
(page 75).
Notes
• Operations cannot be done with the controls on your iPod.
• There are some characters that cannot be displayed in the front
panel display or in the OSD of this unit. Those characters are
replaced with underscores "_".
Press J DISPLAY on the remote control.
1
The following display appears in the OSD.
iPod
Music
Videos
Settings
Top
>
>
>