Troubleshooting - Coffeemaxx Z 01113 Gebrauchsanleitung

8. If necessary, clean the coffee machine and hotplate with a damp cloth and then with
a dry one.
Descaling
If the water only runs very slowly through the device or the device is louder than usual
during the brewing procedure, you should descale it.
1. Pour the mixture of water and descaling agent into the water reservoir and switch on
the device. Pay attention to the directions for use of the descaling agent in regard to
the ratio of water to descaling agent.
2. Let the mixture run through the machine completely. Repeat this procedure if the
water still runs through slowly.
3. After descaling, let water (without coffee) run through the device at least three times
to fl ush the lines etc.
4. Please ensure that you have switched on the Mahlen Aus function if you want to
fl ush the device with water or descale it.

Troubleshooting

If the device should stop working properly, fi rst check whether you are able to correct
the problem yourself. Otherwise, contact our customer service department (see the
"Customer Service" chapter).
Do not try to repair a faulty device yourself!
Problem
The device does not work.
appears on the display.
01113_DE-GB-FR-NL_V11.indb 25 01113_DE-GB-FR-NL_V11.indb 25
25
Possible cause/solution
• Is the plug inserted in the mains socket correctly?
• Is the mains socket defective? Try another mains
socket.
• Check the fuse of the main connection.
• Is the coffee fi lter correctly inserted?
• Is the lid of the fi lter placed on correctly?
• Is the glass pot sitting correctly on the hotplate?
• Pull the plug out of the socket to reset all of the
settings you have made. Check whether the fi lter
compartment insert and the permanent fi lter are
positioned correctly, whether the cover for cleaning
the coffee mill is closed correctly and then try to
start the brewing procedure again.
EN
10.02.2016 10:53:18 10.02.2016 10:53:18